Dell Latitude 9440 2-In-1 How-To Install & Replace Your WiFi Antenna Module


In this Dell laptop tutorial we are going to show you how to install and replace the WiFi Antenna Module on your Latitude 9440 2-In-1 laptop. These installation instructions have been made into 5 easy to follow printable steps. We have also created a video tutorial that shows you how to install your Latitude 9440 2-In-1 WiFi Antenna Module.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x Phillips #0 screwdriver
  • 1 x small plastic scribe
Latitude 9440 2-in-1 WiFi Antenna Module

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Latitude 9440 2-in-1 WiFi Antenna Module

Video tutorial repair manual



Installation and Removal Instructions
Latitude 9440 2-In-1 WiFi Antenna Module

Before you begin: If you need help at any point, you can always contact Parts-People Laptop Repair Department for help with your diagnosis or repair.

Step 1

Unscrew and remove the Bottom Base Cover (6 x captive screws).

Step 2

Unscrew and remove the Bottom Base Cover (6 x captive screws).Unscrew and remove the Bottom Base Cover (6 x captive screws).Unscrew and remove the Bottom Base Cover (6 x captive screws).Unscrew and remove the Bottom Base Cover (6 x captive screws).
Disconnect the battery cable.

Step 3

  • Disconnect the battery cable.
Unscrew and remove the WiFi bracket (1 x captive screw).

Step 4

  • Unscrew and remove the WiFi bracket (1 x captive screw).
  • Disconnect and unroute the antenna cables.
Unscrew and remove the WiFi bracket (1 x captive screw).Disconnect and unroute the antenna cables.Unscrew and remove the WiFi bracket (1 x captive screw).Unscrew and remove the WiFi bracket (1 x captive screw).
Unscrew and remove the WiFi antenna module (2 x 1.6mm x 3mm).

Step 5

  • Unscrew and remove the WiFi antenna module (2 x 1.6mm x 3mm).
  • ***FOLLOW THE ORIGINAL STEPS IN REVERSE TO REASSEMBLE YOUR LAPTOP.
Unscrew and remove the WiFi antenna module (2 x 1.6mm x 3mm).***FOLLOW THE ORIGINAL STEPS IN REVERSE TO REASSEMBLE YOUR LAPTOP.Unscrew and remove the WiFi antenna module (2 x 1.6mm x 3mm).

Topics: Dell Latitude Repair Manuals Dell Laptop Repair Dell Repair Manuals Latitude 9440 2-In-1 WiFi Antenna Module

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.