XPS 13 Plus 9320 How-To Install & Replace Your Keyboard


In this Dell laptop tutorial we are going to show you how to install and replace the Keyboard on your XPS 13 Plus 9320 laptop. These installation instructions have been made into 15 easy to follow printable steps. We have also created a video tutorial that shows you how to install your XPS 13 Plus 9320 Keyboard.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x Phillips #0 screwdriver
  • 1 x T5 Torx screwdriver
  • 1 x small plastic scribe
XPS Plus 9320 Keyboard

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
XPS 13 Plus 9320 Keyboard

Video tutorial repair manual



Installation and Removal Instructions
XPS 13 Plus 9320 Keyboard

Before you begin: If you need help at any point, you can always contact Parts-People Laptop Repair Department for help with your diagnosis or repair.

Step 1

Unscrew and remove the Bottom Base Cover (6 x

Step 2

Unscrew and remove the Bottom Base Cover (6 x Unscrew and remove the Bottom Base Cover (6 x Unscrew and remove the Bottom Base Cover (6 x Unscrew and remove the Bottom Base Cover (6 x
Unscrew and remove the battery connector bracket (1 x 1.6mm x 2mm).

Step 3

  • Unscrew and remove the battery connector bracket (1 x 1.6mm x 2mm).
  • Disconnect the Battery
Unscrew and remove the battery connector bracket (1 x 1.6mm x 2mm).Disconnect the BatteryUnscrew and remove the battery connector bracket (1 x 1.6mm x 2mm).
Unscrew and remove the Battery (6 x

Step 4

Unscrew and remove the Battery (6 x Unscrew and remove the Battery (6 x
Unscrew and remove the bracket and disconnect the display cable (3 x 1.6mm x 2mm) (3 x M1.6 x 2.5mm).

Step 5

  • Unscrew and remove the bracket and disconnect the display cable (3 x 1.6mm x 2mm) (3 x M1.6 x 2.5mm).
Unscrew and remove the bracket and disconnect the display cable (3 x 1.6mm x 2mm) (3 x M1.6 x 2.5mm).Unscrew and remove the bracket and disconnect the display cable (3 x 1.6mm x 2mm) (3 x M1.6 x 2.5mm).Unscrew and remove the bracket and disconnect the display cable (3 x 1.6mm x 2mm) (3 x M1.6 x 2.5mm).Unscrew and remove the bracket and disconnect the display cable (3 x 1.6mm x 2mm) (3 x M1.6 x 2.5mm).
Unscrew and remove the bracket (1 x 1.6mm x 2.3mm).

Step 6

  • Unscrew and remove the bracket (1 x 1.6mm x 2.3mm).
  • Disconnect the WiFi antenna cables.
Unscrew and remove the bracket (1 x 1.6mm x 2.3mm).Disconnect the WiFi antenna cables.
Disconnect the speaker cables.

Step 7

  • Disconnect the speaker cables.
Disconnect the speaker cables.Disconnect the speaker cables.
Unclip the locking tab and disconnect the power button cable.

Step 8

  • Unclip the locking tab and disconnect the power button cable.
Unclip the locking tab and disconnect the power button cable.Unclip the locking tab and disconnect the power button cable.
Unclip the locking tab and disconnect the capacitive touchpanel cable.

Step 9

  • Unclip the locking tab and disconnect the capacitive touchpanel cable.
Unclip the locking tab and disconnect the capacitive touchpanel cable.Unclip the locking tab and disconnect the capacitive touchpanel cable.
Unclip the locking tab and disconnect the keyboard controller cable.

Step 10

  • Unclip the locking tab and disconnect the keyboard controller cable.
Unclip the locking tab and disconnect the keyboard controller cable.Unclip the locking tab and disconnect the keyboard controller cable.
Unclip the locking tab and disconnect the haptic module cable.

Step 11

  • Unclip the locking tab and disconnect the haptic module cable.
Unclip the locking tab and disconnect the haptic module cable.Unclip the locking tab and disconnect the haptic module cable.
Remove the cooling fan screws (2 x M1.6 x 2.5mm).

Step 12

Unscrew and remove the Motherboard  (7 x 1.6mm x 2.3mm) (4 x 1.6mm x 3mm).

Step 13

  • Unscrew and remove the Motherboard (7 x 1.6mm x 2.3mm) (4 x 1.6mm x 3mm).
  • ***The Heatsink can remain attached to the Motherboard during this removal.
Unscrew and remove the Motherboard  (7 x 1.6mm x 2.3mm) (4 x 1.6mm x 3mm).***The Heatsink can remain attached to the Motherboard during this removal.
Unscrew the Power Button bracket.

Step 14

  • Unscrew the Power Button bracket.
  • Route the cable through the Palmrest.
Unscrew the Power Button bracket.Route the cable through the Palmrest.Unscrew the Power Button bracket.
Unscrew and remove the Keyboard (17 x 1.4mm x 1.2mm) (7 x 1.6mm x 2mm).

Step 15

  • Unscrew and remove the Keyboard (17 x 1.4mm x 1.2mm) (7 x 1.6mm x 2mm).
  • ***FOLLOW THESE STEPS IN REVERSE TO REINSTALL YOUR PART.
Unscrew and remove the Keyboard (17 x 1.4mm x 1.2mm) (7 x 1.6mm x 2mm).***FOLLOW THESE STEPS IN REVERSE TO REINSTALL YOUR PART.Unscrew and remove the Keyboard (17 x 1.4mm x 1.2mm) (7 x 1.6mm x 2mm).Unscrew and remove the Keyboard (17 x 1.4mm x 1.2mm) (7 x 1.6mm x 2mm).
XPS Plus 9320 Keyboard

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
XPS 13 Plus 9320 Keyboard

Topics: Dell XPS Repair Manuals Dell Laptop Repair Dell Repair Manuals Keyboard XPS 13 Plus (9320)

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.