Dell Latitude 7410 How-To Install & Replace Your Keyboard

By on June 10, 2024 · 6:20 pm
PrintEmail

In this Dell laptop tutorial we are going to show you how to install and replace the Keyboard on your Latitude 7410 laptop. These installation instructions have been made into 17 easy to follow printable steps. We have also created a video tutorial that shows you how to install your Latitude 7410 Keyboard.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x Phillips #0 screwdriver
  • 1 x Phillips #00 screwdriver
  • 1 x small plastic scribe
Latitude 7410 Keyboard

Dell Laptop Replacement Parts Needed

6FRC6 Image
Eligible for $5.00 Economy Shipping.
Only 13 left in stock - order soon.
951X1 Image
Eligible for $5.00 1st Class Shipping.
Only 9 left in stock - order soon.
GMM47 Image
Eligible for $5.00 Economy Shipping.
Only 4 left in stock - order soon.
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Latitude 7410 Keyboard

Video tutorial repair manual



Installation and Removal Instructions
Latitude 7410 Keyboard

Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.

Step 1

Unscrew the Bottom Base Cover (8 x captive screws).

Step 2

  • Unscrew the Bottom Base Cover (8 x captive screws).
  • Use a plastic scribe to pry apart and remove the Bottom Base Cover.
Unscrew the Bottom Base Cover (8 x captive screws).Use a plastic scribe to pry apart and remove the Bottom Base Cover.Unscrew the Bottom Base Cover (8 x captive screws).Unscrew the Bottom Base Cover (8 x captive screws).
Disconnect the battery cable.

Step 3

  • Disconnect the battery cable.
Disconnect the battery cable.Disconnect the battery cable.
Unscrew and remove the Battery (4 x captive screws).

Step 4

  • Unscrew and remove the Battery (4 x captive screws).
Unscrew and remove the Battery (4 x captive screws).Unscrew and remove the Battery (4 x captive screws).
Remove the heat shield.

Step 5

  • Remove the heat shield.
Remove the heat shield.Remove the heat shield.
Unscrew and remove the antenna bracket (1 x 2mm x 2.5mm).

Step 6

  • Unscrew and remove the antenna bracket (1 x 2mm x 2.5mm).
  • Disconnect the antenna cables.
Unscrew and remove the antenna bracket (1 x 2mm x 2.5mm).Disconnect the antenna cables.Unscrew and remove the antenna bracket (1 x 2mm x 2.5mm).
Unscrew and remove the LCD bracket (2 x M2 x 2mm).

Step 7

  • Unscrew and remove the LCD bracket (2 x M2 x 2mm).
  • Disconnect the LCD cables.
Unscrew and remove the LCD bracket (2 x M2 x 2mm).Disconnect the LCD cables.Unscrew and remove the LCD bracket (2 x M2 x 2mm).Unscrew and remove the LCD bracket (2 x M2 x 2mm).
Unscrew the Cooling Fan (2 x 2mm x 2.5mm).

Step 8

Unclip the locking tab and disconnect the LED cable.

Step 9

  • Unclip the locking tab and disconnect the LED cable.
  • Unclip the locking tab and disconnect the touchpad cable.
Unclip the locking tab and disconnect the LED cable.Unclip the locking tab and disconnect the touchpad cable.Unclip the locking tab and disconnect the LED cable.Unclip the locking tab and disconnect the LED cable.
Unclip the locking tab and disconnect the USH board cable.

Step 10

  • Unclip the locking tab and disconnect the USH board cable.
Unclip the locking tab and disconnect the USH board cable.Unclip the locking tab and disconnect the USH board cable.
Unscrew and disconnect the F-Beam from the motherboard (2 x M2 x 2mm).

Step 11

  • Unscrew and disconnect the F-Beam from the motherboard (2 x M2 x 2mm).
Unscrew and disconnect the F-Beam from the motherboard (2 x M2 x 2mm).Unscrew and disconnect the F-Beam from the motherboard (2 x M2 x 2mm).
Disconnect the speaker cable.

Step 12

  • Disconnect the speaker cable.
Unscrew and remove I/O (1 x 2mm x 3.5mm) (1 x 2mm x 2.5mm).

Step 13

  • Unscrew and remove I/O (1 x 2mm x 3.5mm) (1 x 2mm x 2.5mm).
Unscrew and remove I/O (1 x 2mm x 3.5mm) (1 x 2mm x 2.5mm).Unscrew and remove I/O (1 x 2mm x 3.5mm) (1 x 2mm x 2.5mm).
Unclip the locking tabs and disconnect the keyboard cables.

Step 14

  • Unclip the locking tabs and disconnect the keyboard cables.
Unclip the locking tabs and disconnect the keyboard cables.Unclip the locking tabs and disconnect the keyboard cables.Unclip the locking tabs and disconnect the keyboard cables.Unclip the locking tabs and disconnect the keyboard cables.
Unscrew and remove the Motherboard (4 x

Step 15

Unscrew and remove the Motherboard (4 x Unscrew and remove the Motherboard (4 x
NOTE: USE A PHILLIPS #00 TO REMOVE THESE SCREWS:

Step 16

  • NOTE: USE A PHILLIPS #00 TO REMOVE THESE SCREWS:
  • Unscrew and remove the keyboard assembly (18 x 2mm x 2.5mm).
NOTE: USE A PHILLIPS #00 TO REMOVE THESE SCREWS:Unscrew and remove the keyboard assembly (18 x 2mm x 2.5mm).
Unscrew and remove the Keyboard (2 x

Step 17

Unscrew and remove the Keyboard (2 x Unscrew and remove the Keyboard (2 x Unscrew and remove the Keyboard (2 x
Latitude 7410 Keyboard

Dell Laptop Replacement Parts Needed

6FRC6 Image
Eligible for $5.00 Economy Shipping.
Only 13 left in stock - order soon.
951X1 Image
Eligible for $5.00 1st Class Shipping.
Only 9 left in stock - order soon.
GMM47 Image
Eligible for $5.00 Economy Shipping.
Only 4 left in stock - order soon.
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Latitude 7410 Keyboard

Topics: Dell Latitude Repair Manuals Dell Laptop Repair Dell Repair Manuals Keyboard Latitude 7410

Tags

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.