Dell Latitude 5440 How-To Install & Replace Your Palmrest Touchpad

By on April 30, 2025 · 1:30 pm
PrintEmail

In this Dell laptop tutorial we are going to show you how to install and replace the Palmrest Touchpad on your Latitude 5440 laptop. These installation instructions have been made into 22 easy to follow printable steps. We have also created a video tutorial that shows you how to install your Latitude 5440 Palmrest Touchpad.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x Phillips #0 screwdriver
  • 1 x small plastic scribe
Latitude 5440 Palmrest Touchpad

Dell Laptop Replacement Parts Needed

9P5D6 Image
Eligible for $5.99 Economy Shipping.
Only 2 left in stock - order soon.
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Latitude 5440 Palmrest Touchpad

Video tutorial repair manual



Installation and Removal Instructions
Latitude 5440 Palmrest Touchpad

Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.

Step 1

CAUTION: Electrostatic Discharge (ESD) is the build up of static electricity on a person's body. This can cause serious damage to your laptop. You can use an ESD wrist strap or an ESD mat to help prevent this.

Step 2

  • CAUTION: Electrostatic Discharge (ESD) is the build up of static electricity on a person's body. This can cause serious damage to your laptop. You can use an ESD wrist strap or an ESD mat to help prevent this.
CAUTION: Electrostatic Discharge (ESD) is the build up of static electricity on a person's body. This can cause serious damage to your laptop. You can use an ESD wrist strap or an ESD mat to help prevent this.CAUTION: Electrostatic Discharge (ESD) is the build up of static electricity on a person's body. This can cause serious damage to your laptop. You can use an ESD wrist strap or an ESD mat to help prevent this.
TOOLS FOR THIS REPAIR: Phillips #0 and a

Step 3

TOOLS FOR THIS REPAIR: Phillips #0 and a Unscrew the Bottom Base Cover (8 X captive screws).Pry apart and remove the Bottom Base Cover.TOOLS FOR THIS REPAIR: Phillips #0 and a
Disconnect the Battery Cable.

Step 4

Disconnect the Battery Cable.Disconnect the Battery Cable.
Unscrew and remove the Battery (5 X captive screws).

Step 5

  • Unscrew and remove the Battery (5 X captive screws).
Unscrew and remove the Battery (5 X captive screws).Unscrew and remove the Battery (5 X captive screws).
Unscrew and remove the inner frame (8 x M2 x 3mm).

Step 6

  • Unscrew and remove the inner frame (8 x M2 x 3mm).
Unscrew and remove the inner frame (8 x M2 x 3mm).Unscrew and remove the inner frame (8 x M2 x 3mm).
Unscrew and remove the LCD cable bracket (2 x M2 x 3mm).

Step 7

  • Unscrew and remove the LCD cable bracket (2 x M2 x 3mm).
  • Disconnect the LCD cable.
  • IF YOUR DISPLAY HAS AN IR CABLE, THIS SHOULD BE DISCONNECTED ALSO.
Unscrew and remove the LCD cable bracket (2 x M2 x 3mm).Disconnect the LCD cable.IF YOUR DISPLAY HAS AN IR CABLE, THIS SHOULD BE DISCONNECTED ALSO.Unscrew and remove the LCD cable bracket (2 x M2 x 3mm).
Unscrew the left and right LCD hinges (4 x M2.5 x 5mm).

Step 8

Unscrew the left and right LCD hinges (4 x M2.5 x 5mm).Separate the LCD Display Assembly from the Palmrest.Unscrew the left and right LCD hinges (4 x M2.5 x 5mm).
Disconnect the cooling fan cable.

Step 9

  • Disconnect the cooling fan cable.
Disconnect the cooling fan cable.Disconnect the cooling fan cable.
Unscrew and remove the Cooling Fan (2 x

Step 10

Unscrew and remove the Cooling Fan (2 x Unscrew and remove the Cooling Fan (2 x
Unscrew and remove the SSD thermal bracket (2 x M2 x 3mm).

Step 11

Unscrew and remove the SSD thermal bracket (2 x M2 x 3mm).Slide out the M.2 NVMe SSD.Unscrew and remove the SSD thermal bracket (2 x M2 x 3mm).
Unscrew and remove the WiFi antenna bracket (1 x M2 x 3mm).

Step 12

  • Unscrew and remove the WiFi antenna bracket (1 x M2 x 3mm).
  • Disconnect the WiFi antennas.
Unscrew and remove the WiFi antenna bracket (1 x M2 x 3mm).Disconnect the WiFi antennas.Unscrew and remove the WiFi antenna bracket (1 x M2 x 3mm).Unscrew and remove the WiFi antenna bracket (1 x M2 x 3mm).
Disconnect the Speaker cable.

Step 13

  • Disconnect the Speaker cable.
Remove the Speakers.

Step 14

Remove the Speakers.Remove the Speakers.
Unclip the locking tab and then disconnect the touchpad cable.

Step 15

  • Unclip the locking tab and then disconnect the touchpad cable.
Unclip the locking tab and then disconnect the touchpad cable.Unclip the locking tab and then disconnect the touchpad cable.
Unclip the locking tabs and then disconnect the keyboard cables.

Step 16

  • Unclip the locking tabs and then disconnect the keyboard cables.
Unclip the locking tabs and then disconnect the keyboard cables.Unclip the locking tabs and then disconnect the keyboard cables.Unclip the locking tabs and then disconnect the keyboard cables.Unclip the locking tabs and then disconnect the keyboard cables.
Unscrew and remove the Touchpad (8 x

Step 17

Unscrew and remove the Touchpad (8 x Unscrew and remove the Touchpad (8 x
Unscrew the Tyoe-C bracket (3 x M2 x 3mm).

Step 18

  • Unscrew the Tyoe-C bracket (3 x M2 x 3mm).
IF YOUR MODEL WAS SOLD WITH A FINGERPRINT READER:

Step 19

  • IF YOUR MODEL WAS SOLD WITH A FINGERPRINT READER:
  • Unscrew the fingerprint reader cable bracket (1 x M2 x 3mm).
  • Disconnect the fingerprint reader cable.
IF YOUR MODEL WAS SOLD WITH A FINGERPRINT READER:Unscrew the fingerprint reader cable bracket (1 x M2 x 3mm).
Unscrew and remove the Motherboard (3 x M2 x 4mm).

Step 20

  • Unscrew and remove the Motherboard (3 x M2 x 4mm).
  • The Heatsink can remain attached to the Motherboard for this repair.
Unscrew and remove the Motherboard (3 x M2 x 4mm).The Heatsink can remain attached to the Motherboard for this repair.
Unscrew and remove the Power Button (2 X 2mm x 2.5mm)

Step 21

  • Unscrew and remove the Power Button (2 X 2mm x 2.5mm)
Unscrew and remove the Power Button (2 X 2mm x 2.5mm)Unscrew and remove the Power Button (2 X 2mm x 2.5mm)
Unscrew and remove the Keyboard (17 x

Step 22

  • Unscrew and remove the Keyboard (17 x M2 x 2mm).
  • ***FOLLOW THE ORIGINAL STEPS IN REVERSE TO REASSEMBLE YOUR LAPTOP.
Unscrew and remove the Keyboard (17 x ***FOLLOW THE ORIGINAL STEPS IN REVERSE TO REASSEMBLE YOUR LAPTOP.Unscrew and remove the Keyboard (17 x
Latitude 5440 Palmrest Touchpad

Dell Laptop Replacement Parts Needed

9P5D6 Image
Eligible for $5.99 Economy Shipping.
Only 2 left in stock - order soon.
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Latitude 5440 Palmrest Touchpad

Topics: Dell Latitude Repair Manuals Dell Laptop Repair Dell Repair Manuals Latitude 5440 Palmrest Touchpad

Tags

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.