Dell Latitude 3310 2-in-1 How-To Install & Replace USB/IO Circuit Board


In this Dell laptop tutorial we are going to show you how to install and replace the USB/IO Circuit Board on your Latitude 3310 2-in1 laptop. These installation instructions have been made into 6 easy to follow printable steps. We have also created a video tutorial that shows you how to install your Latitude 3310 2-in1 USB/IO Circuit Board.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x small phillips head screwdriver
  • 1 x small plastic scribe
Latitude 3310 2-in-1 USB IO Circuit Board

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Latitude 3310 2-in-1 USB IO Circuit Board

Video tutorial repair manual



Installation and Removal Instructions
Latitude 3310 2-in1 USB/IO Circuit Board

Loosen the bottom base screws (10 x captive screws).

Step 1

  • Loosen the bottom base screws (10 x captive screws).
  • Use a plastic scribe to unsnap and separate the bottom base cover.
  • Use your fingers to carefully work your way around and remove the Bottom Base Cover Assembly.
Loosen the bottom base screws (10 x captive screws).Use a plastic scribe to unsnap and separate the bottom base cover.Use your fingers to carefully work your way around and remove the Bottom Base Cover Assembly.Loosen the bottom base screws (10 x captive screws).
Peel back the tape covering the battery cable connector.

Step 2

  • Peel back the tape covering the battery cable connector.
  • Disconnect the battery cable.
Peel back the tape covering the battery cable connector.Disconnect the battery cable.
Unscrew the left LCD hinge (3 x M2.5 x 5mm).

Step 3

  • Unscrew the left LCD hinge (3 x M2.5 x 5mm).
  • Lift the left LCD hinge from palmrest assembly.
Unscrew the left LCD hinge (3 x M2.5 x 5mm).Lift the left LCD hinge from palmrest assembly.Unscrew the left LCD hinge (3 x M2.5 x 5mm).
Use a plastic scribe to unclip and remove the USB/IO circuit board cable.

Step 4

Use a plastic scribe to unclip and remove the USB/IO circuit board cable.Unscrew and remove USB/IO Circuit Board (2 x Use a plastic scribe to unclip and remove the USB/IO circuit board cable.Use a plastic scribe to unclip and remove the USB/IO circuit board cable.
Need a USB/IO Circuit Board?

Step 5

Step 6

    Latitude 3310 2-in-1 USB IO Circuit Board

    Dell Laptop Replacement Parts Needed

    DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
    Use this coupon code to save 5% off these parts
    DIYM514
    Latitude 3310 2-in-1 USB IO Circuit Board

    Topics: Dell Latitude Repair Manuals Dell Laptop Repair Dell Repair Manuals Latitude 3310 2-In-1 USB/IO Circuit Board

    Join the conversation!

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    This site uses Akismet to reduce spam. Learn how your comment data is processed.