Dell Latitude 3190 (P26T004) Digitizer Circuit Board Removal & Installation


In this Dell laptop tutorial we are going to show you how to install and replace the Digitizer Circuit Board on your Latitude 3190 laptop. These installation instructions have be made into 4 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Latitude 3190 Digitizer Circuit Board.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x small phillips head screwdriver
  • 1 x small plastic scribe
Latitude 3190 Digitizer Circuit Board

Video tutorial repair manual



Installation and Removal Instructions
Latitude 3190 Digitizer Circuit Board

Unscrew and remove Bottom Cover (Captive screws).

Step 1

Unscrew and remove Bottom Cover (Captive screws).Unscrew and remove Bottom Cover (Captive screws).
Unscrew and disconnect Battery (3 x

Step 2

Unscrew and disconnect Battery (3 x Unscrew and disconnect Battery (3 x Unscrew and disconnect Battery (3 x
Use flat object to separate and remove Back Cover.

Step 3

  • Use flat object to separate and remove Back Cover.
Use flat object to separate and remove Back Cover.Use flat object to separate and remove Back Cover.
Disconnect and remove Digitizer Circuit Board.

Step 4

  • Disconnect and remove Digitizer Circuit Board.
Disconnect and remove Digitizer Circuit Board.Disconnect and remove Digitizer Circuit Board.

Topics: Dell Latitude Repair Manuals Dell Laptop Repair Dell Repair Manuals Digitizer Circuit Board Latitude 3190

Join the conversation!