Dell Latitude 3588 (P79G002) VGA/USB Circuit Board Removal & Installation


In this Dell laptop tutorial we are going to show you how to install and replace the VGA/USB Circuit Board on your Latitude 3588 laptop. These installation instructions have be made into 4 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Latitude 3588 VGA/USB Circuit Board.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x small phillips head screwdriver
  • 1 x small plastic scribe
Latitude 3588 VGA/usb

Video tutorial repair manual



Installation and Removal Instructions
Latitude 3588 VGA/USB Circuit Board

Unscrew and remove Access Door (10 x

Step 1

Unscrew and remove Access Door (10 x Unscrew and remove Access Door (10 x Unscrew and remove Access Door (10 x
Unscrew and disconnect Battery (3 x

Step 2

Unscrew and disconnect Battery (3 x Unscrew and disconnect Battery (3 x Unscrew and disconnect Battery (3 x
Unscrew and lift hinge from motherboard (1 x M2.5 x 5mm).

Step 3

  • Unscrew and lift hinge from motherboard (1 x M2.5 x 5mm).
Unscrew and lift hinge from motherboard (1 x M2.5 x 5mm).Unscrew and lift hinge from motherboard (1 x M2.5 x 5mm).
Unscrew and disconnect VGA/USB Circuit Board (1 x M2 x 5mm).

Step 4

  • Unscrew and disconnect VGA/USB Circuit Board (1 x M2 x 5mm).
Unscrew and disconnect VGA/USB Circuit Board (1 x M2 x 5mm).Unscrew and disconnect VGA/USB Circuit Board (1 x M2 x 5mm).Unscrew and disconnect VGA/USB Circuit Board (1 x M2 x 5mm).

Topics: Dell Latitude Repair Manuals Dell Laptop Repair Dell Repair Manuals Latitude 3588 VGA/USB Circuit Board

Join the conversation!