Dell Latitude D631 (PP18L) LCD Display Screen Rail Removal and Installation


In this Dell laptop tutorial we are going to show you how to install and replace the LCD Display Screen Rail on your Dell Latitude D631 (PP18L) laptop. These installation instructions have be made into 7 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Dell Latitude D631 (PP18L) LCD Display Screen Rail.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x small phillips head screw driver
  • 1 x small plastic scribe
Latitude D631 LCD Screen Screen Rail

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Latitude D631 LCD Display Screen Rail

Video tutorial repair manual



Installation and Removal Instructions
Dell Latitude D631 LCD Display Screen Rail

Slide the battery down and lift out of the laptop.

Step 1

  • Slide the battery latches over.
  • Slide the battery down and lift out of the laptop.
Slide the battery down and lift out of the laptop. Slide the battery latches over.
Remove the screw hole covers.

Step 2

  • Turn the laptop over and open it as wide as possible, approximately 180 degrees.
  • Remove the screw hole covers.
  • Remove the (6) 2.5mm x 5mm x 1.5mm bezel screws.
Remove the screw hole covers. Remove the (6) 2.5mm x 5mm x 1.5mm bezel screws.
Starting at the bottom of the LCD screen, lift the bezel until it unsnaps and work your way around the edge of the screen.

Step 3

  • Starting at the bottom of the LCD screen, lift the bezel until it unsnaps and work your way around the edge of the screen.
Unplug and remove the LCD cable from the channel routing.

Step 4

  • Unplug and remove the LCD cable from the channel routing.
Remove the (6) 2.5mm x 5mm screws at the bottom of the screen.

Step 5

  • Remove the (2) 2mm x 3mm screws at the top of the screen.
  • Remove the (6) 2.5mm x 5mm screws at the bottom of the screen.
Remove the (6) 2.5mm x 5mm screws at the bottom of the screen. Remove the (2) 2mm x 3mm screws at the top of the screen.
Unplug the LCD cable from the LCD screen and inverter.

Step 6

  • Remove the LCD screen from the LCD back assembly and turn it over.
  • Unplug the LCD cable from the LCD screen and inverter.
Remove the (8) 2mm x 3mm screws and remove the mounting rails on the left and right sides of the LCD screen.

Step 7

  • Remove the (8) 2mm x 3mm screws and remove the mounting rails on the left and right sides of the LCD screen.
Latitude D631 LCD Screen Screen Rail

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Latitude D631 LCD Display Screen Rail

Topics: Dell Latitude Repair Manuals Dell Laptop Repair Dell Repair Manuals LCD Display Screen Rail Latitude D631

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.