Dell Venue 10 Pro (5055) USB Circuit Board Removal and Installation


In this Dell laptop tutorial we are going to show you how to install and replace the USB Circuit Board on your Venue 10 Pro (5055) laptop. These installation instructions have be made into 6 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Venue 10 Pro (5055) USB Circuit Board.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x small phillips head screwdriver
  • 1 x T4 Torx screwdriver
  • 1 x small plastic scribe
Venue 10 Pro 5055 usb

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Venue 10 Pro 5055 usb

Video tutorial repair manual



Installation and Removal Instructions
Venue 10 Pro (5055) USB Circuit Board

Turn off the tablet.

Step 1

  • Turn off the tablet.
  • Loosen the Torx screw.
  • Loosen the Micro-SIM reader door.
Turn off the tablet.Loosen the Torx screw.Loosen the Micro-SIM reader door.
Using a scribe, carefully pry up and unsnap the bottom cover access door.

Step 2

  • Using a scribe, carefully pry up and unsnap the bottom cover access door.
Using a scribe, carefully pry up and unsnap the bottom cover access door.Using a scribe, carefully pry up and unsnap the bottom cover access door.
Unplug the battery cable.

Step 3

  • Unplug the battery cable.
  • Remove the 8 - M2 x 3mm screws.
  • Remove the battery.
Unplug the battery cable.Remove the 8  - M2 x 3mm screws.Remove the battery.Unplug the battery cable.
Unplug the docking station circuit board cable.

Step 4

  • Unplug the docking station circuit board cable.
  • Remove the 8 - M2 x 5mm screws.
Unplug the docking station circuit board cable.Remove the 8 - M2 x 5mm screws.
Using a scribe, separate & remove the middle frame base assembly.

Step 5

  • Using a scribe, separate & remove the middle frame base assembly.
Using a scribe, separate & remove the middle frame base assembly.Using a scribe, separate & remove the middle frame base assembly.Using a scribe, separate & remove the middle frame base assembly.
Unplug the USB circuit board cable.

Step 6

  • Unplug the USB circuit board cable.
  • Remove the 2 - M2 x 5mm screws.
  • Remove the USB circuit board & cable.
Unplug the USB circuit board cable.Remove the 2 - M2 x 5mm screws.Remove the USB circuit board & cable.Unplug the USB circuit board cable.
Venue 10 Pro 5055 usb

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Venue 10 Pro 5055 usb

Topics: Dell Venue Tablet Repair Manuals Dell Laptop Repair Dell Repair Manuals USB Circuit Board Venue 10 Pro (5055)

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.