In this Dell laptop tutorial we are going to show you how to install and replace the USB / Vibrator Motor Circuit Board on your Venue 11 Pro (5130) laptop. These installation instructions have be made into 9 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Venue 11 Pro (5130) USB / Vibrator Motor Circuit Board.
Before you begin


Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screwdriver
- 1 x small plastic scribe
|
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Venue 11 Pro (5130) USB / Vibrator Motor Circuit Board


Step 1
- Using a scribe, lift and unsnap the bottom door.


Step 2
- Slide the battery latches over until they click in the unlocked position.
- Lift the battery out of the tablet.


Step 3
- Press a paperclip into the ejector hole until the SD card carrier ejects.
- Remove the Mirco SD card.


Step 4
- Remove the cable cover screw.
- Remove the cable cover.


Step 5
- Open the cable latch.
- Unplug the cables


Step 6
- Remove the base screws.


Step 7
- Carefully unsnap the base assembly.


Step 8
- Unplug the cable.
- Remove the screws.


Step 9
- Unplug the vibrator motor cable.
- Remove the vibrator motor.
- Remove the USB circuit board.
|
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|

Laptop & Tablet Parts


















