In this Dell laptop tutorial we are going to show you how to install and replace the LCD Camera on your Inspiron 15R N5110 laptop. These installation instructions have be made into 10 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Inspiron 15R N5110 LCD Camera.
Before you begin
Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screwdriver
- 1 x small flat head screwdriver
- 1 x small plastic scribe
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Inspiron 15R N5110 LCD Camera

Step 1
- Slide the locking latch over.
- Slide the latch the the left and the battery out.
![]() ![]() ![]() |

Step 2
- Remove the bottom base screws.

Step 3
- Turn the laptop over and open it up.
- Press in the 4 keyboard clips to loosen the keyboard.

Step 4
- Turn the keyboard over.
- Unplug the keyboard cable.

Step 5
- Remove the palmrest screws.

Step 6
- Unplug the palmrest cables.
- Remove the palmrest.
![]() ![]() |

Step 7
- Unplug the antenna cables.
- Unplug the LCD cable.
![]() ![]() |

Step 8
- Remove the hinge screws.
- Remove the LCD display assembly.

Step 9
- Lift up the edge of the bezel and unsnap it from the display.

Step 10
- Unplug the camera cable.
- Remove the camera.
![]() ![]() |
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Read Related Articles
- Hard Drive Formatting How To Guide
- Dell Inspiron 15R (N5110) Beep Codes Diagnostic Indicators
- Dell Inspiron 15R N5110 Bottom Base Removal and Installation
- Dell Inspiron 15R N5110 Speakers Removal and Installation
- Dell Inspiron 15R N5110 USB IO Circuit Board Removal and Installation
- Dell Inspiron 15R N5110 DC Jack Circuit Board Removal and Installation