Dell Inspiron 1545 (PP41L) Audio Jack Face Plate Removal and Installation


In this Dell laptop tutorial we are going to show you how to install and replace the Audio Jack Face Plate on your Dell Inspiron 1545 (PP41L) laptop. These installation instructions have be made into 18 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Dell Inspiron 1545 (PP41L) Audio Jack Face Plate.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x small phillips head screw driver
  • 1 x small plastic scribe
Inspiron 1545 Audio Face Plate

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Inspiron 1545 Audio Face Plate

Video tutorial repair manual



Installation and Removal Instructions
Dell Inspiron 1545 Audio Jack Face Plate

Remove the battery.

Step 1

  • Remove the battery.
Unscrew the 4 screws holding the Bottom Base Access Cover and remove the cover, starting from right to left.

Step 2

  • Unscrew the 4 screws holding the Bottom Base Access Cover and remove the cover, starting from right to left.
Remove the (2) 2.5mm x 5mm hinge screws from the base of the laptop.

Step 3

  • Carefully dislodge the cables until they are completely loose from the base.
  • Remove the (2) 2.5mm x 5mm hinge screws from the base of the laptop.
Remove the (2) 2.5mm x 5mm hinge screws from the base of the laptop. Carefully dislodge the cables until they are completely loose from the base.
Remove two 2mm x 3mm screws that hold the 1545 center control power button cover to the base of the computer.

Step 4

  • Remove the (11) 2.5mm x 5mm screws on the base of the laptop.
  • Remove two 2mm x 3mm screws that hold the 1545 center control power button cover to the base of the computer.
Remove two 2mm x 3mm screws that hold the 1545 center control power button cover to the base of the computer. Remove the (11) 2.5mm x 5mm screws on the base of the laptop.
Lift and unsnap the 1545 center control power button cover using a small flat head screw driver or a plastic scribe from the backside of the computer, from right to left. **Be very careful removing it because the plastic can be fragile.

Step 5

  • Turn the computer over (as if you were typing on it), and fully open the display (approximately 180 degrees, or as far as possible).
  • Lift and unsnap the 1545 center control power button cover using a small flat head screw driver or a plastic scribe from the backside of the computer, from right to left. **Be very careful removing it because the plastic can be fragile.
Unscrew the (2) 2.5mm x 5mmscrews above the keyboard and gently lift up the keyboard to reveal the ribbon cable. Be careful lifting the keyboard because it is very easy to cause damage to the ribbon cable or the motherboard connector. (If the motherboard connector breaks, it is very hard to find replacements for them without replacing the entire motherboard.)

Step 6

  • Unscrew the (2) 2.5mm x 5mmscrews above the keyboard and gently lift up the keyboard to reveal the ribbon cable. Be careful lifting the keyboard because it is very easy to cause damage to the ribbon cable or the motherboard connector. (If the motherboard connector breaks, it is very hard to find replacements for them without replacing the entire motherboard.)
Lift the keyboard cable connector latch and remove the keyboard ribbon cable and keyboard.

Step 7

  • Lift the keyboard cable connector latch and remove the keyboard ribbon cable and keyboard.
Loosen the LCD display cable from motherboard the by pulling up on the tab.

Step 8

  • Display Assembly
  • Loosen the LCD display cable from motherboard the by pulling up on the tab.
  • Loosen the camera cable from the motherboard.
Loosen the LCD display cable from motherboard the by pulling up on the tab. Loosen the camera cable from the motherboard.
Pull the WWAN and WLAN cables through the motherboard paying close attention to the routing, once again.

Step 9

  • Pull the WWAN and WLAN cables through the motherboard paying close attention to the routing, once again.
Unscrew (2) 2.5mm x 3mm wafer screws on the right hinge.

Step 10

  • Unscrew (2) 2.5mm x 3mm wafer screws on the left hinge.
  • Unscrew (2) 2.5mm x 3mm wafer screws on the right hinge.
  • Lift the display form the base.
Unscrew (2) 2.5mm x 3mm wafer screws on the right hinge. Lift the display form the base. Unscrew (2) 2.5mm x 3mm wafer screws on the left hinge.
Remove the (1) 2.5mm x 3mm wafer and (4) 2.5mm x 5mm.

Step 11

  • Remove the (1) 2.5mm x 3mm wafer and (4) 2.5mm x 5mm.
Unplug and loosen the power button cable.

Step 12

  • Unplug and loosen the bluetooth cable.
  • Unplug and loosen the power button cable.
  • Unplug the touchpad cable.
Unplug and loosen the power button cable.Unplug the touchpad cable. Unplug and loosen the bluetooth cable.
Remove the 1545 touchpad palm rest by lift up on the edges and the in the center until it is dislodged.

Step 13

  • Remove the 1545 touchpad palm rest by lift up on the edges and the in the center until it is dislodged.
Lift the Express Card Slot up to remove it off of the motherboard.

Step 14

  • Unscrew the (3) 2mm x 3mm screws that hold the 1545 Express Card Slot Assembly on the base.
  • Lift the Express Card Slot up to remove it off of the motherboard.
Lift the Express Card Slot up to remove it off of the motherboard. Unscrew the (3) 2mm x 3mm screws that hold the 1545 Express Card Slot Assembly on the base.
Unscrew the 4 remaining screws that hold down the motherboard. (2) 2mm x 3mm and (2) 2.5mm x 5mm screws.

Step 15

  • Unscrew the 4 remaining screws that hold down the motherboard. (2) 2mm x 3mm and (2) 2.5mm x 5mm screws.
Unhook the speaker cable, fan, and USB Cable.

Step 16

  • Unhook the speaker cable, fan, and USB Cable.
Unhook the speaker cable, fan, and USB Cable.Unhook the speaker cable, fan, and USB Cable.Unhook the speaker cable, fan, and USB Cable.
The motherboard part number is located on the front of the motherboard under the touchpad palm rest.

Step 17

  • Gently pull the motherboard out of the base by lifting the right side first.
  • The motherboard part number is located on the front of the motherboard under the touchpad palm rest.
The motherboard part number is located on the front of the motherboard under the touchpad palm rest. Gently pull the motherboard out of the base by lifting the right side first.
After the motherboard is removed simply slide the 1545 audio jack face plate out of the base assembly.

Step 18

  • After the motherboard is removed simply slide the 1545 audio jack face plate out of the base assembly.
Inspiron 1545 Audio Face Plate

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Inspiron 1545 Audio Face Plate

Topics: Dell Inspiron Repair Manuals Dell Inspiron 1545 Repair Manual Dell Laptop Repair Dell Repair Manuals Audio Face Plate Inspiron 1545

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.